Current Custom Bach Project, begin date: 02-08-03



Just previsualizing. The horn is still a long way before the bell will be mounted. Actually the last thing I will do is mount the bell.

I will, however, solder the bell ferrule into place. First it must be buffed. Here I use a holder while I buff with red rouge.

Building a horn is dirty work. This is after I have washed my hands!

Next, I solder the ferrule into place. This is one solder joint when it's best to have too much solder than not enough. The excess solder must be scraped away. No solder blobs in this horn!

Next...

Back

Start over